The E-40 Series Entry phones are compact, weather and vandal resistant, telephone line powered speaker phones designed to provide two-way handsfree communication. The E-40's compact size allows it to be mounted in a standard single gang electrical box. The E-40 is available in five different attractive finishes to match your door hardware, light fixtures, etc. Replacement E-40 faceplates (PNL40) can be purchased seperately and are available in all five standard finishes. The E-40 entry phones can share a single phone line with house or small business telephones when used with a Viking model C-200 or C-2000A Entry Phone controller. The E-40 entry phones can also be connected to an unused analog station port (programmed for ring down) on a phone system or connected directly to a telephone line when used with a Viking model K-1900-5 auto dialer. The E-40 features microphone and speaker volume controls, selectable auto answer for monitoring and intelligent call progress detection for automatic hang-up when the call is completed. For extreme outdoor environments or corrosive atmospheres, the E-40 Series is available with Enhanced Weather Protection (EWP). Applications Door or gate communication Residential, commercial and industrial door security Business delivery entrances Use in conjunction with a Viking K-1900-5 Auto Dialer on telephone lines or analog PABX/KSU stations Use on any programmed ringdown circuit of an analog PABX/KSU station Use with Viking C-2000A Door and Gate Controller to control 1 to 4 entry phones on a single phone line Features Compact size: Front panel is the size of a typical single gang mid- size wall plate Mounting: Flush mounts in any single gang (1.7” deep minimum) electrical box (single gang old work rough-in box included) or surface mounts in a Viking model VE-3x5 (not included) Available in 5 standard faceplate finishes: Brushed Stainless Steel, Oil Rubbed Bronze, Polished Brass, Satin Black and Satin White PNL-40 faceplates: Replacement faceplates with matching screws available in all five standard finishes Weather Resistant Features: Mylar speaker, faceplate gasket, mic and speaker gasket, internally sealed (IP67) push button switch, self draining mic mount and UV stable weather resistant powder coating (excluding E-40-SS Stainless Steel faceplate) Optional Enhanced Weather Protection (EWP) available Vandal Resistant Features: 16 gauge polished brass or 18 gauge stainless steel faceplate, stainless steel push button, stainless steel speaker screen, scratch resistant powder coating, hex drive mounting screws Telephone line powered Microphone and speaker volume controls Programmable Intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out Selectable auto answer feature for monitoring Programmable VOX (mic/speaker) switching speed Specifications Power: Telephone line powered (18 VDC/20mA minimum) Dimensions: Faceplate: 123.8mm x 79.4mm x 4.6mm (4.875” x 3.125” x 0.18”), Rough-in box (Allied Molded 9331): 86.4mm x 61mm x 63.5mm (3.4” x 2.4” x 2.5”) Shipping Weight: 0.45 kg (1.0 lbs) Operating Temperature: -32° C to 54° C (-25° F to 130° F) Humidity: Standard model: 5% to 95% non-condensing humidity, EWP model: up to 100% humidity Speaker Volume: Approximately 62db maximum @ 1m Ring Voltage: 25V AC RMS minimum (for auto answer) CPC Disconnect Time: 300ms minimum REN: 0.8A Connections: (2) gel-filled butt connector