For use with Talk-A-Phone tower, pedestal, surface, wall and flush mount enclosures. Code Blue towers require redrilling and tapping. The E-1600A-TP-EWP will call up to 5 numbers and send a digital announcement to identify the location of the emergency call. In addition, the LDB-3 control module will supply a contact or switched 12V DC to activate a strobe light. Though the strobe requires external power to operate, voice communication is possible during power failures. All phone numbers, location numbers, voice announcement and programming parameters are stored in non-volatile memory. No batteries are required. The E-1600A-TP-EWP is equipped for outdoor or harsh environments with EWP (Enhanced Weather Protection) , which features: potted circuit boards, sealed trim pots and dip switches, rubber gaskets and boots, gel-filled butt connectors, and extended operating temperature: -15 dgF to 130 dgF, tested to -35 dgF. Direct Physical Replacement for Talk-A-Phone Model ETP-400(V) Panel Phone. Applications Elevators Parking ramps/lots Pools Automated Tellers (ATM) Area of refuge locations Lobbies Entryways Roadside emergency stations Stadiums Convention centers Campus Security Sites Entryways Stairwells in Public Buildings Features EWP (Enhanced Weather Protection) Meets ADA requirements for Emergency Phones: - Can automatically light the “Call Connected” LED for the hearing impaired - Transmits a unique location I.D. code or voice announcement - Grade 2 Braille label for the visually impaired Non-volatile digital voice announcer with 16 seconds of voice memory Provides contact or switched 12V DC for controlling a strobe light Advanced call progress detection Handsfree operation Phone line powered emergency phone (LDB-3 requires power) Non-volatile memory (no batteries required) Touch Tone or pulse dialing Dials up to 5 emergency numbers Cycles through backup emergency and non-emergency numbers on busy or no-answer Hangs up on CPC, silence, busy signal, dial tone, time-out or Touch Tone command Programmable to auto-answer on incoming calls Remotely programmable Extended temperature range (-15 dgF to 130 dgF) Central Station Monitoring capability (dials 2 numbers Separate central station voice speed dial number High visibility, vandal and weather resistant Central Station Monitoring capability (dials 2 numbers) Separate central station voice speed dial number Optional PB-100 Polling System available ** CAUTION - When installing on an analog extension of a phone system: Some phone systems do not conform to analog telecom standards and might not be compatible with the 1600A Series emergency phones. Specifications Phone Power: Telephone line powered (24V DC/20mA min) LDB-3 Control Module: 120V AC/12V DC 500mA, UL listed adapter provided Dimensions: 241mm x 299mm x 51mm (9.5” x11.75” x2”) Shipping Weight: kg ( lbs) Mounting: Flush mount to Talk-A-Phone ETP towers, wall mounts, boxes and pedestals Environmental: -26°C to 54°C (-15°F to 130°F) with 5% to 95% non-condensing humidity Material: .125” (11 gauge) brushed stainless steel Connections: Color-coded wires with gel-filled butt connectors